Sometimes your Bluetooth speaker stops playing music, so here’s how to reset Harman Kardon Bluetooth speaker. If your Harman Kardon Bluetooth Speaker is not connecting to your phone or tablet, you can take a few steps to reset it. 

  1. Press and hold the power button for about 10 seconds on the speaker until the blue light blinks twice and the speaker beeps.
  2. Go to the power button and wait about two minutes for the speaker to finish resetting its settings. 
  3. Pair your speaker with your device by pressing and holding the Bluetooth button for about five seconds until you see a Bluetooth symbol (two blue dots) appear on your speaker’s screen. 
  4. Connect your speaker to your device by pressing the Bluetooth button and choosing “Harman Kardon” from the list of devices. 

Resetting Harman Kardon Bluetooth Speaker

Resetting your Bluetooth speaker might be the answer if your speaker is having trouble pairing with your phone or other devices.

Here’s how: 

  1. Open the speaker and locate the charging cable.
  2. The charging cable should be plugged into an electrical outlet, and the speaker end should be plugged into the outlet.
  3. You will see a red light flash on the speaker after holding the power button for five seconds.
  4. Release the power button and wait until all blue lights turn off before unplugging the charging cable from both speakers ends.
  5. Connect Bluetooth properly with the PC
  •  Now open the browser window. 
  • Enter the Harman Kardon Bluetooth speaker in the address field (or search for it if it isn’t already listed).

Will Resetting Bluetooth Speaker Fix The Problem It Has?

If your Bluetooth speaker is not working correctly, there is a good chance that resetting it will solve the problem. When a Bluetooth speaker is reset, all of its settings are erased and must be set up from scratch. This includes locating and connecting to nearby devices, which can be difficult if your speaker has lost connection with your phone or tablet. If resetting doesn’t work, you may need to replace the Bluetooth speaker.

Will resetting my Harman Kardon speaker reduce its life?

Experts agree that resetting a Harman Kardon speaker will not necessarily result in a shorter life span. Many factors are involved in speaker longevity, such as usage and care. However, if you’re concerned about the longevity of your speaker, it’s always best to consult an expert before taking any drastic measures.

How To Reset Harman Kardon Onyx Studio 2?

If your Harman Kardon Onyx Studio 2 is not functioning correctly, you can do a few things to try and fix the issue.

  1. The first step is to check if everything is plugged in correctly and that there are no issues with power if all of that checks out.
  2. The next step is to reset the unit by pressing and holding down the RESET button for 10 seconds. 
  3. After resetting the unit, try using different audio cables and speakers to rule out any problems with those components. 
  4. If, after following these steps, the Onyx Studio 2 still does not work correctly, it may be time for a new one.

How to reset HK Kardon Onyx Studio 4?

There are a few ways to reset your HK Kardon Onyx Studio 4

  1. Use the “Reset” button on the front of the speaker. This will take you through a series of prompts to restore your speaker to its factory settings.
  2. If you’re having trouble with a Bluetooth connection, it is a good idea to turn off Bluetooth and then turn it back on again.
  3. If you’re still experiencing issues, try resetting your speaker by putting it back in the wall outlet after it’s been unplugged.
  4. It is possible that HK Kardon can assist you if none of these solutions work.

How to put the Harman Kardon speaker on pairing mode?

If you own a Harman Kardon speaker and are looking to pair it with your device, there are a few different ways that you can do so. One way is to open the speaker’s settings and go to Pairing. You can select your device from the list of paired devices and complete the Bluetooth connection. If your device is not listed, try scanning for new devices or using the search bar. 

Another way to pair your Harman Kardon speaker is by using its NFC tag. Place the NFC tag near your compatible device’s NFC reader and follow the on-screen prompts. Connect your speaker to power and then press and hold down both volume buttons until it turns on.

How to know if Harman Kardon’s Bluetooth speaker is charging?

If you own a Harman Kardon Bluetooth speaker, you may have noticed that it takes a while to charge when connected to an outlet. This is because the speaker uses a unique charging technology called Smart Charging. Here’s how to know if your Harman Kardon Bluetooth speaker is charging: 

  1. Check the indicator light on the speaker.
  2. If the indicator light does not turn blue or green after 10 minutes of connecting the speaker to an outlet, it needs to be recharged.

How to reset Harmon Kardon Citation 1?

If you are experiencing difficulties with your Harmon Kardon Citation 1 audio system, there is a way to reset it. The steps to reset your Harmon Kardon Citation 1 are as follows: 

  1. Unplug the power cord from the back of the unit. 
  2. Remove any CDs or other removable media from the player. 
  3. Hold up the power button for at least 10 seconds until you see a green light on the front of the player indicating that it has been turned off. 
  4. Reconnect power to the unit and insert any CDs or other removable media. 
  5. Press play on the player and wait for it to start up; press stop and eject any discs in the player when it does. 

How to reset Harman Kardon mini?

If you are having trouble with your Harman Kardon mini audio player, there is a way to reset it. Next, remove the battery cover and locate the reset button. Push down on the reset button until it clicks into place. After doing this, replace the battery cover and plug in the power cord.

What if my Harman Kardon speaker has a physical reset button?

If your Harman Kardon speaker has a physical reset button, you can use it to reset it to factory settings. Hold the reset button for a few seconds, and the speaker will then reboot, erasing any settings or faults.

More Guides For You.

William
William
William is technical editor of Wooster Audio, an audio enthusiast passionate about cutting-edge technologies. He has been working with us for three years, meticulously reviewing and evaluating wireless (speakers & soundbars), hi-fi, and home cinema equipment, and has covered 1000+ audio products. His background is based in Audio engineering and he has an ardent passion for building home theater systems and audio systems and loves audio mixing, editing and sound designing. This allows William to share this knowledge on Wooster audio site. He provides the most comprehensive audio information available by tapping into his expertise and keen insights. He can guide you to audio excellence on Wooster Audio with his discerning ear and commitment to quality. Contact William for any question (william@woosteraudio.com)